IOS-XE VPN PSK authentication using IKE ID
When using pre-shared key (PSK) authentication on a Site-to-Site VPN using Cisco IOS-XE routers, the IP address of the egress interface is used to match the PSK and authenticate the…
Securing IOS-XE VPNs
Securing IOS-XE VPNs This post provides some guidelines in securing an IPSec VPN on a Cisco IOS-XE router to reduce the attack surface when acting as a VPN gateway. Disable…
IOS-XE FlexVPN Remote Access VPN
In this example FlexVPN Remote Access VPN users will authenticate to the Hub router using RSA certificates. Using the IKEv2 Name Mangler feature, the organisation-unit (OU) value will be extracted…
IOS-XE FlexVPN IKEv2 Routing
On Cisco IOS-XE routers, FlexVPN supports the use of Dynamic Routing protocols such as EIGRP, BGP and OSPF. FlexVPN also has the ability to advertise routes in the IKEv2 Security…
IOS-XE FlexVPN Static VTI
Cisco IOS-XE routers support various types of secure IPSec VPN's including Static Virtual Tunnel Interfaces (SVTI), which is a route based VPN commonly referred to as FlexVPN. With a FlexVPN…
IOS-XE FlexVPN certificate authentication
This post describes the steps to configure certificate authentication for a VPN on a Cisco IOS-XE router. Configuration The certificates in this FlexVPN lab are signed by the CA called…