IOS-XE VPN PSK authentication using IKE ID
When using pre-shared key (PSK) authentication on a Site-to-Site VPN using Cisco IOS-XE routers, the IP address of the egress interface is used to match the PSK and authenticate the…
Check Point Gaia Configuration Backup
Check Point support several different methods to perform a backup of security gateways running the Gaia Operating System. These include: Snapshots – includes a full image of the entire root…
Check Point Mgmt API using Smartconsole CLI
Check Point Security Management Server (SMS) management API (Application Programming Interface) supports the ability to send commands and read information from the management server. APIs provides the ability for the…
Check Point ISP Redundancy
Check Point gateways support ISP Redundancy feature, there are two options for the traffic distribution: Load Sharing and High Availability. With High Availability (Primary/Backup) the next hop IP address is…
ISE TrustSec using RESTAPI
By default, Cisco Identity Services Engine (ISE) uses a PAC file transmitted over RADIUS to exchange TrustSec environment data between ISE and the Network Access Devices (NADs). From ISE version…
ISE Certificate Authentication
When deploying Cisco ISE for Network Access Control using 802.1X, the most common authentication protocols used are PEAP/MSCHAPv2 or EAP-TLS, and to a lesser extent EAP-FAST and TEAP. PEAP/MSCHAPv2 is…
- 1
- 2
- 3
- 4
- …
- 11
- Go to the next page